Gardena 1874 운영자 매뉴얼 - 페이지 7

{카테고리_이름} Gardena 1874에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena 1874 17 페이지. Water computer
Gardena 1874에 대해서도 마찬가지입니다: 사용 설명서 (17 페이지), 사용 설명서 (17 페이지)

페이지 인쇄

Fit anti-theft device (optional) [ Fig. I8 ]:

To secure your Water Control against theft, you

can obtain the GARDENA Anti-theft device

Art. 1815-00.791.00 from GARDENA Service.

1. Screw clamp

(22)

with screw

of the Water Control.

4. PROGRAMMING

To set the programme, the controller can be

removed and mobile programming can

be carried out (see 3. INITIAL OPERATION

Inserting battery).

Programming can be discontinued at any time by

pressing the Man. button. All programme data

changed up to this time and confirmed with the

OK button is saved.

Set current time and day of week:

1. [ Fig. P1 ]: Press Menu-key [Level 2] (not

necessary if the battery has just been inserted).

The hours display and Time flash.

2. [ Fig. P2 ]: Set the time in hours with the

▼-▲ button (example:

with the OK-key.

Time and the minutes display flash.

3. [ Fig. P3 ]: Set the time in minutes with the

▼-▲ button (example:

with the OK-key.

Time and the day of the week display flash.

4. [ Fig. P4 ]: Set day of week with the ▼-▲ but-

tons (e. g. (Tu) and confirm with the OK button.

The display moves to the message "Entering

watering programme" of the watering mode

"Scheduled watering" [Level 3].

Start Prog and the hours will flash on the

display.

Watering modes:

The Water Control has 3 watering modes:

A) Scheduled watering:

With the "scheduled watering", watering begins

as per the set programme. There is the addi-

tional option to consider soil moisture or rain in

the watering programme. In the case of rain

or sufficiently moist soil, the programme's stop

is activated or activation of the programme is

prevented. Manual watering Man. + OK is still

possible.

B) Direct sensor control :

With "direct sensor control", watering is exclu-

sively controlled in dependency on soil moisture

between 20:00 and 06:00, if the sensor has

(23)

firmly to the back

hours) and confirm

minutes) and confirm

2. Use clamp

(22)

e. g. for fixing a chain.

It is no longer possible to remove the screw after

it has been screwed in.

indicated dry. 1 or 2 Soil Moisture Sensors can

be connected.

C) Manual watering:

With "Manual watering", watering begins imme-

diately after Man. + OK has been pressed and

can be operated independently of the sensor

status.

Entering watering programme:

A) Scheduled watering:

1. Select programme for Valve 1 ( ï V1) or

Valve 2 (V2 ð ) with the ▼-▲ buttons (V1 / V2),

(not possible if the current time of day and week-

day have been previously entered).

2. [ Fig. P5 ]: Press Menu-key twice [Level 3]

(not necessary if the current time and day of the

week has been entered).

Start Prog and the hours section flash on the

display.

3. [ Fig. P6 ]: Set the watering start time hours with

the ▼-▲ button (e. g.

OK-key.

Start Prog and the minute display flashes on

the screen.

4. [ Fig. P7 ]: Set the minutes for starting the

watering time with the ▼-▲ button

(example:

minutes) and confirm with the

OK-key.

Run Time and the hours for the watering time

flash on the display.

5. [ Fig. P8 ]: Set the hours for the watering time

with the ▼-▲ button (example:

confirm with the OK-key.

Run Time and minutes for the watering time

flash on the display.

6. [ Fig. P9 ]: Set watering time minutes with the

▼-▲ button (example:

with the OK-key.

Watering cycle flashes on the display.

The watering frequency can be selected by:

• the (7.) watering cycle (right hand column of

the display)

– or –

) and confirm with the

hours) and

minutes) and confirm