Avaya 4600 Series 연결 - 페이지 6
{카테고리_이름} Avaya 4600 Series에 대한 연결을 온라인으로 검색하거나 PDF를 다운로드하세요. Avaya 4600 Series 14 페이지. Infrared dialing
Avaya 4600 Series에 대해서도 마찬가지입니다: 설치 및 안전 지침 (11 페이지), 안전 지침 (11 페이지), 제품 정보 (2 페이지), 매뉴얼 (4 페이지)
페이지 인쇄
2.
Configure switch port inline power
1. Click Device View on the Toolbar.
2. Select Physical Interface -> Power -> Configure in the navigation panel;
3. The following window displays the switch default power configuration.
Note that for all ports, Power State is Inactive and Profile is set to Not Guaranteed, as there
are no Powered Devices (PDs) connected to the switch.
The screen lists the following information for all the switch ports:
Power State
The Power over Ethernet status for that port. This can take one of the following values:
• Active — The port is currently delivering power.
• Inactive — No device is currently requesting power from the port.
SZ; Reviewed:
WCH 3/19/2004
Figure 5: Port Inline Power Configuration
Solution & Interoperability Test Lab Application Notes
©2004 Avaya Inc. All Rights Reserved.
6 of 14
3com-PoE-Config.doc