Fronius KD Supply 2500 사용 설명서 - 페이지 14

{카테고리_이름} Fronius KD Supply 2500에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fronius KD Supply 2500 20 페이지.
Fronius KD Supply 2500에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지)

페이지 인쇄

Care, maintenance and disposal

General remarks

Under normal operating conditions the KD Supply 2500 requires only a minimum of care

and maintenance. However, it is vital to observe some important points to ensure the weld-

ing system remains in a usable condition for many years.

An electric shock can be fatal.

Before opening the machine

► Turn power source mains switch to position „O"n

► Disconnect the machine from the mains

► Put up an easy-to-understand warning sign to stop anybody inadvertently switching it

► Using a suitable measuring instrument, check to make sure that electrically charged

Every start-up

Every 6 months

Risk of damage to electronic components.

Do not bring the air nozzle too close to electronic components.

Disposal

Dispose of in accordance with the applicable national and local regulations.

WARNING!

back on again

components (e.g. capacitors) have been discharged

Check welding torch, interconnecting hosepack and ground earth connection for signs

of damage

Perform a visual check on the feed rollers and inner liners for signs of damage

Check contact pressure of feed rollers and adjust if necessary

Check brake and adjust if necessary

Dismantle device side panels and clean inside of device with dry, reduced com-

pressed air

NOTE!