Fronius KD Supply 2500 Kullanım Talimatları Kılavuzu - Sayfa 14
Kaynak Sistemi Fronius KD Supply 2500 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Fronius KD Supply 2500 20 sayfaları.
Ayrıca Fronius KD Supply 2500 için: Kullanım Talimatları Kılavuzu (16 sayfalar)
Sayfayı Yazdır
Care, maintenance and disposal
General remarks
Under normal operating conditions the KD Supply 2500 requires only a minimum of care
and maintenance. However, it is vital to observe some important points to ensure the weld-
ing system remains in a usable condition for many years.
An electric shock can be fatal.
Before opening the machine
► Turn power source mains switch to position „O"n
► Disconnect the machine from the mains
► Put up an easy-to-understand warning sign to stop anybody inadvertently switching it
► Using a suitable measuring instrument, check to make sure that electrically charged
Every start-up
-
-
-
-
Every 6 months
-
Risk of damage to electronic components.
Do not bring the air nozzle too close to electronic components.
Disposal
Dispose of in accordance with the applicable national and local regulations.
14
WARNING!
back on again
components (e.g. capacitors) have been discharged
Check welding torch, interconnecting hosepack and ground earth connection for signs
of damage
Perform a visual check on the feed rollers and inner liners for signs of damage
Check contact pressure of feed rollers and adjust if necessary
Check brake and adjust if necessary
Dismantle device side panels and clean inside of device with dry, reduced com-
pressed air
NOTE!