Fronius KD Supply 2500 사용 설명서 - 페이지 12

{카테고리_이름} Fronius KD Supply 2500에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fronius KD Supply 2500 16 페이지.
Fronius KD Supply 2500에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지)

페이지 인쇄

Care, maintenance and disposal

General remarks

Under normal operating conditions the KD Supply 2500 requires only a minimum of care

and maintenance. However, it is vital to observe some important points to ensure the

welding system remains in a usable condition for many years.

Danger from electrical current.

This can result in serious personal injury and damage to property.

▶

Every start-up

Every 6 months

Danger due to the effect of compressed air.

This can result in damage to property.

▶

Disposal

Dispose of in accordance with the applicable national and local regulations.

WARNING!

Before starting work, switch off all devices and components involved and disconnect

them from the grid.

Secure all devices and components involved so they cannot be switched back on.

After opening the device, use a suitable measuring instrument to check that electric-

ally charged components (such as capacitors) have been discharged.

Check welding torch, interconnecting hosepack and ground earth connection for

signs of damage

Perform a visual check on the feed rollers and inner liners for signs of damage

Check contact pressure of feed rollers and adjust if necessary

Check brake and adjust if necessary

Dismantle device side panels and clean inside of device with dry, reduced com-

pressed air

CAUTION!

Do not bring the air nozzle too close to electronic components.