Gardena AccuCut Li 9850 사용 설명서 - 페이지 7
{카테고리_이름} Gardena AccuCut Li 9850에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena AccuCut Li 9850 14 페이지.
Gardena AccuCut Li 9850에 대해서도 마찬가지입니다: 사용 설명서 (13 페이지), 사용 설명서 (13 페이지)
페이지 인쇄
5. STORAGE
To put into storage:
1
Disposal:
(in accordance with
RL2012/19/EC)
8
6. TROUBLESHOOTING
1
To change the blade:
2
w
q
0
9
The unit must be stowed away from children.
1. Charge the battery. This increases the life of the battery.
2. Clean the unit (see 4. MAINTENANCE) and slide the protective
cover
over the blade
1
3. Stowe the unit in a dry area where it has protection from frost.
2
The unit must not be added to usual household waste.
Refer to local environmental laws for discarding.
The unit contains lithium-ion cells that should not be discarded with
normal household waste at the end of their life.
Please return the lithium-ion cells to your GARDENA dealer or
dispose of them properly at a public recycling centre.
1. Discharge lithium-ion cells
2. Remove lithium-ion cells
3. Dispose of lithium-ion cells
DANGER! Risk of physical injury!
Cut injury when the unit starts accidentally.
v B efore you troubleshoot the unit, make sure that the
protective cover
2
Only an original GARDENA blade is allowed to be used.
A new blade can be ordered by the GARDENA Service.
1. Push the button
2. Remove the blade
3. If necessary clean the transmission chamber and lubricate the
excentric drive
4. Turn the excentric drive
5. Pull the crank
6. Place the new blade
excentric drive
7. Slide the lid
.
2
completely.
8
from the unit.
8
properly.
8
is slid over the blade
1
and slide the lid
9
.
2
with some acid-free grease (Vaseline).
q
downwards.
q
on the back side of the blade
w
on the motor unit in such a way that the
2
is inserted in the crank
q
upwards until it makes a click.
0
.
2
downwards.
0
in the middle.
2
.
w
7