Gardena AccuCut Li 9850 Çalıştırma Talimatları Kılavuzu - Sayfa 7
Çim ve Bahçe Ekipmanları Gardena AccuCut Li 9850 için çevrimiçi göz atın veya pdf Çalıştırma Talimatları Kılavuzu indirin. Gardena AccuCut Li 9850 14 sayfaları.
Ayrıca Gardena AccuCut Li 9850 için: Çalıştırma Talimatları Kılavuzu (13 sayfalar), Çalıştırma Talimatları Kılavuzu (13 sayfalar)
Sayfayı Yazdır
5. STORAGE
To put into storage:
1
Disposal:
(in accordance with
RL2012/19/EC)
8
6. TROUBLESHOOTING
1
To change the blade:
2
w
q
0
9
The unit must be stowed away from children.
1. Charge the battery. This increases the life of the battery.
2. Clean the unit (see 4. MAINTENANCE) and slide the protective
cover
over the blade
1
3. Stowe the unit in a dry area where it has protection from frost.
2
The unit must not be added to usual household waste.
Refer to local environmental laws for discarding.
The unit contains lithium-ion cells that should not be discarded with
normal household waste at the end of their life.
Please return the lithium-ion cells to your GARDENA dealer or
dispose of them properly at a public recycling centre.
1. Discharge lithium-ion cells
2. Remove lithium-ion cells
3. Dispose of lithium-ion cells
DANGER! Risk of physical injury!
Cut injury when the unit starts accidentally.
v B efore you troubleshoot the unit, make sure that the
protective cover
2
Only an original GARDENA blade is allowed to be used.
A new blade can be ordered by the GARDENA Service.
1. Push the button
2. Remove the blade
3. If necessary clean the transmission chamber and lubricate the
excentric drive
4. Turn the excentric drive
5. Pull the crank
6. Place the new blade
excentric drive
7. Slide the lid
.
2
completely.
8
from the unit.
8
properly.
8
is slid over the blade
1
and slide the lid
9
.
2
with some acid-free grease (Vaseline).
q
downwards.
q
on the back side of the blade
w
on the motor unit in such a way that the
2
is inserted in the crank
q
upwards until it makes a click.
0
.
2
downwards.
0
in the middle.
2
.
w
7