Avaya 9110 빠른 시작 매뉴얼 - 페이지 8
{카테고리_이름} Avaya 9110에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Avaya 9110 11 페이지. Remote gateway
페이지 인쇄Avaya Remote GatewayInstallation
8
To connect the Remote Gateway 911x series unit to the power source as follows:
1
2
3
As soon as you connect the Remote Gateway 911x unit to the power source, the
unit begins to power up and the power LED comes on. The power-up cycle takes
about 30 seconds to complete. When the Remote Gateway 911x unit completes a
successful self-test, the power LED flashes three times and the telephone display
shows one of the following two messages:
•
•
The ETHERNET TX and RX LEDs flash only during transmit and receive
activity.
N0027496
Connect the plug on the power transformer to the POWER connector on the
Remote Gateway 911x series unit.
Attach the power cord to the power transformer.
Plug the power supply into an uninterruptible power source (UPS) or wall
outlet.
a time and date, if connected to a PBX
HOSTLESS MODE, if the 911x unit is not configured