Avaya 9110 Hızlı Başlangıç Kılavuzu - Sayfa 8

Telefon Avaya 9110 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Avaya 9110 11 sayfaları. Remote gateway

Avaya Remote GatewayInstallation

To connect the Remote Gateway 911x series unit to the power source as follows:

As soon as you connect the Remote Gateway 911x unit to the power source, the

unit begins to power up and the power LED comes on. The power-up cycle takes

about 30 seconds to complete. When the Remote Gateway 911x unit completes a

successful self-test, the power LED flashes three times and the telephone display

shows one of the following two messages:

•

The ETHERNET TX and RX LEDs flash only during transmit and receive

activity.

N0027496

Connect the plug on the power transformer to the POWER connector on the

Remote Gateway 911x series unit.

Attach the power cord to the power transformer.

Plug the power supply into an uninterruptible power source (UPS) or wall

outlet.

a time and date, if connected to a PBX

HOSTLESS MODE, if the 911x unit is not configured