Makita XWT07 매뉴얼
{카테고리_이름} Makita XWT07에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita XWT07 8 페이지.
Makita XWT07에 대해서도 마찬가지입니다: 사용 설명서 (12 페이지), 사용 설명서 (12 페이지)
![Makita XWT07 매뉴얼](/uploads/products/server2/2150120/2150120.jpg)
WARNING MAKITA CORDLESS IMPACT WRENCH
Any piece of equipment can be dangerous if not operated properly. YOU are
responsible for the safe operation of this equipment. The operator must
carefully read and follow any warnings, safety signs and instructions provided
with or located on the equipment. Do not remove, defeat, deface or render
inoperable any of the safety devices or warnings on this equipment. If any
safety devices or warnings have been removed, defeated, defaced or rendered
inoperable, DO NOT USE THIS EQUIPMENT!!!
WARNING: Lithium-ion Batteries and/or products that contain Lithium-
ion Batteries can expose you to chemicals including cobalt lithium nickel oxide,
and nickel, which are known to the State of California to cause cancer and birth
defects or other reproductive harm.
For more information, go to
If the person receiving this handout will not be the user of the equipment,
forward these instructions to the operator. If there is any doubt as to the
operation or safety of the equipment, DO NOT USE!! CALL A TOOL SHED
IMMEDIATELY!!! FAILURE TO FOLLOW THESE INSTRUCTIONS
COULD RESULT IN INJURY OR DEATH.
General power tool safety warnings
WARNING:
Read all safety warnings and
all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1.
Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2.
Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3.
Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
www.P65warnings.ca.gov
Electrical Safety
1.
2.
3.
4.
5.
6.
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
If operating a power tool in a damp location is
unavoidable, use a ground fault circuit inter-
rupter (GFCI) protected supply. Use of a GFCI
reduces the risk of electric shock.