Makita XWT07 Manual

Procurar online ou descarregar pdf Manual para Ferramenta eléctrica Makita XWT07. Makita XWT07 8 páginas.
Também para Makita XWT07: Manual de instruções (12 páginas), Manual de instruções (12 páginas)

Imprimir página

WARNING MAKITA CORDLESS IMPACT WRENCH

Any piece of equipment can be dangerous if not operated properly. YOU are

responsible for the safe operation of this equipment. The operator must

carefully read and follow any warnings, safety signs and instructions provided

with or located on the equipment. Do not remove, defeat, deface or render

inoperable any of the safety devices or warnings on this equipment. If any

safety devices or warnings have been removed, defeated, defaced or rendered

inoperable, DO NOT USE THIS EQUIPMENT!!!

WARNING: Lithium-ion Batteries and/or products that contain Lithium-

ion Batteries can expose you to chemicals including cobalt lithium nickel oxide,

and nickel, which are known to the State of California to cause cancer and birth

defects or other reproductive harm.

For more information, go to

If the person receiving this handout will not be the user of the equipment,

forward these instructions to the operator. If there is any doubt as to the

operation or safety of the equipment, DO NOT USE!! CALL A TOOL SHED

IMMEDIATELY!!! FAILURE TO FOLLOW THESE INSTRUCTIONS

COULD RESULT IN INJURY OR DEATH.

General power tool safety warnings

WARNING:

Read all safety warnings and

all instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

Do not operate power tools in explosive atmo-

spheres, such as in the presence of flammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

www.P65warnings.ca.gov

Electrical Safety

Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tric shock if your body is earthed or grounded.

Do not expose power tools to rain or wet con-

ditions. Water entering a power tool will increase

the risk of electric shock.

Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

If operating a power tool in a damp location is

unavoidable, use a ground fault circuit inter-

rupter (GFCI) protected supply. Use of a GFCI

reduces the risk of electric shock.