Gardena EVC 1000 사용 설명서 - 페이지 8

{카테고리_이름} Gardena EVC 1000에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena EVC 1000 13 페이지. Electric aerator
Gardena EVC 1000에 대해서도 마찬가지입니다: 사용 설명서 (12 페이지), 사용 설명서 (15 페이지), 사용 설명서 (14 페이지), 운영자 매뉴얼 (9 페이지), 사용 설명서 (15 페이지), 운영자 매뉴얼 (9 페이지), 사용 설명서 (14 페이지), 사용 설명서 (13 페이지), 사용 설명서 (13 페이지), 사용 설명서 (15 페이지), 운영자 매뉴얼 (10 페이지)

페이지 인쇄

Problem

Motor cuts out because

blocking protection has

been activated

Aerating results are not

satisfactory

Aerator cylinder no longer

turns

In the event of other faults please contact GARDENA Service.

Repairs should only be carried out by GARDENA service centres or dealers

authorised by GARDENA.

8. Storing Your Electric Aerator

Storage :

Transport :

Disposal :

(in accordance with

Directive 2012 / 19 / EU)

Possible Cause

Blocked by foreign bodies.

Aerating depth too large (aerator

cylinder has been adjusted for

wear without wear to the knives).

The grass is too tall.

Aerator cylinder is worn.

Cog-belt faulty.

Lawn has grown too tall.

Overload protection (torsion

bar) is overturned.

To save space the aerator can be folded up by releasing

the wing nuts.

Take care during this process that the cable does not

become trapped.

v Store the Aerator in a dry, closed room to which children

cannot gain access.

1. Switch off motor, unplug from the mains and wait until the

aerator cylinder stops.

2. Move the wear compensation to the transport position and

raise the aerator when transporting it over sensitive surfaces,

e.g. tiles.

The product must not be added to normal household waste. It

must be disposed of in line with local environmental regulations.

v Important : Make sure that the unit is disposed of via your

municipal recycling collection centre.

Remedy

1. Switch off the motor, re-

move the mains plug from

the socket and wait until

the Aerator has stopped

rotating.

2. Remove foreign bodies.

3. After approx. 1 minute

switch on the Aerator.

1. Leave motor to cool down.

2. Set adjustment for wear

correctly.

v Mow the lawn before

aerating (see 3. Function

"Correct Aerating" ).

v Adjust aerator cylinder

(see Maintenance).

v Have the machine repaired

by GARDENA Service.

v Mow the lawn before using

the Aerator.

v Replace torsion bar.