Gardena EVC 1000 Panduan Petunjuk Pengoperasian - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Peralatan Rumput dan Taman Gardena EVC 1000. Gardena EVC 1000 13 halaman. Electric aerator
Juga untuk Gardena EVC 1000: Panduan Petunjuk Pengoperasian (12 halaman), Panduan Petunjuk Pengoperasian (15 halaman), Panduan Petunjuk Pengoperasian (14 halaman), Panduan Operator (9 halaman), Panduan Petunjuk Pengoperasian (15 halaman), Panduan Operator (9 halaman), Panduan Petunjuk Pengoperasian (14 halaman), Panduan Petunjuk Pengoperasian (13 halaman), Panduan Petunjuk Pengoperasian (13 halaman), Panduan Petunjuk Pengoperasian (15 halaman), Panduan Operator (10 halaman)

Gardena EVC 1000 Panduan Petunjuk Pengoperasian
Problem
Motor cuts out because
blocking protection has
been activated
Aerating results are not
satisfactory
Aerator cylinder no longer
turns
In the event of other faults please contact GARDENA Service.
Repairs should only be carried out by GARDENA service centres or dealers
A
authorised by GARDENA.

8. Storing Your Electric Aerator

Storage :
Transport :
Disposal :
(in accordance with
Directive 2012 / 19 / EU)
Possible Cause
Blocked by foreign bodies.
Aerating depth too large (aerator
cylinder has been adjusted for
wear without wear to the knives).
The grass is too tall.
Aerator cylinder is worn.
Cog-belt faulty.
Lawn has grown too tall.
Overload protection (torsion
bar) is overturned.
To save space the aerator can be folded up by releasing
the wing nuts.
Take care during this process that the cable does not
become trapped.
v Store the Aerator in a dry, closed room to which children
cannot gain access.
1. Switch off motor, unplug from the mains and wait until the
aerator cylinder stops.
2. Move the wear compensation to the transport position and
raise the aerator when transporting it over sensitive surfaces,
e.g. tiles.
The product must not be added to normal household waste. It
must be disposed of in line with local environmental regulations.
v Important : Make sure that the unit is disposed of via your
municipal recycling collection centre.
Remedy
1. Switch off the motor, re-
move the mains plug from
the socket and wait until
the Aerator has stopped
rotating.
2. Remove foreign bodies.
3. After approx. 1 minute
switch on the Aerator.
1. Leave motor to cool down.
2. Set adjustment for wear
correctly.
v Mow the lawn before
aerating (see 3. Function
"Correct Aerating" ).
v Adjust aerator cylinder
(see Maintenance).
v Have the machine repaired
by GARDENA Service.
v Mow the lawn before using
the Aerator.
v Replace torsion bar.
17