Gardena EVC 1000 Panduan Petunjuk Pengoperasian - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Peralatan Rumput dan Taman Gardena EVC 1000. Gardena EVC 1000 13 halaman. Electric aerator
Juga untuk Gardena EVC 1000: Panduan Petunjuk Pengoperasian (12 halaman), Panduan Petunjuk Pengoperasian (15 halaman), Panduan Petunjuk Pengoperasian (14 halaman), Panduan Operator (9 halaman), Panduan Petunjuk Pengoperasian (15 halaman), Panduan Operator (9 halaman), Panduan Petunjuk Pengoperasian (14 halaman), Panduan Petunjuk Pengoperasian (13 halaman), Panduan Petunjuk Pengoperasian (13 halaman), Panduan Petunjuk Pengoperasian (15 halaman), Panduan Operator (10 halaman)

Halaman Cetak
Gardena EVC 1000 Panduan Petunjuk Pengoperasian

7. Trouble-Shooting

Replacing aerator cylinder :
E
2
F
K
1
F
I J
Problem
Abnormal noise.
Clattering in the unit
Whistling sound
Motor will not start
16
DANGER ! The aerator cylinder can cause injuries !
A
V Prior to rectifying faults, unplug from the mains
and wait until the aerator cylinder has stopped.
V Wear working gloves when rectifying faults.
If the aerator cylinder is in wear adjustment position 3 and is worn,
the aerator cylinder must be replaced.
Only use the original GARDENA cylinder for art. 4068 which can
be ordered via GARDENA-Service.
1. Unscrew two screws
2. Lift aerator cylinder
shaft 2.
3. Remove bearing shell
G
4. Push new spring
the new aerator roller
F
5. Push new aerator cylinder
way that the torsion spring
J
shaft
.
6. Push bearing shell
7. Screw bearing shell
out tightening too much.
8. Set wear compensation to aerator position 1
(see 6. Maintenance "Adjusting for wear" ).
Possible Cause
Foreign bodies on the aerator
cylinder are hitting the Aerator.
Foreign bodies blocking
the aerator cylinder.
Cogged belt slipping.
Faulty cable.
The conductor cross-section of
the extension cable is possibly
too low.
E
on the underside of the housing.
F
at an angle 1 and pull away the drive
K
from the aerator cylinder
H
, new stop
and new torsion spring
F
.
G
H
F
on to the drive shaft in such a
I
is inserted in the gap in the drive
K
on to the aerator roller
K
to the underside of the housing
Remedy
1. Switch off the Aerator,
remove the mains plug from
the socket and wait until the
Aerator has stopped rotating.
2. Remove foreign bodies.
3. Check aerator immediately.
immediately.
v Have the machine repaired
by GARDENA Service.
v Check cable.
v Contact your electrician.
F
.
I
into
I
F
.
E
, with-