Gardena EVC 1000 Kullanım Talimatları Kılavuzu - Sayfa 7

Çim ve Bahçe Ekipmanları Gardena EVC 1000 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Gardena EVC 1000 13 sayfaları. Electric aerator
Ayrıca Gardena EVC 1000 için: Kullanım Talimatları Kılavuzu (12 sayfalar), Kullanım Talimatları Kılavuzu (15 sayfalar), Kullanım Talimatları Kılavuzu (14 sayfalar), Operatör El Kitabı (9 sayfalar), Kullanım Talimatları Kılavuzu (15 sayfalar), Operatör El Kitabı (9 sayfalar), Kullanım Talimatları Kılavuzu (14 sayfalar), Kullanım Talimatları Kılavuzu (13 sayfalar), Kullanım Talimatları Kılavuzu (13 sayfalar), Kullanım Talimatları Kılavuzu (15 sayfalar), Operatör El Kitabı (10 sayfalar)

Sayfayı Yazdır

Gardena EVC 1000 Kullanım Talimatları Kılavuzu

7. Trouble-Shooting

Replacing aerator cylinder :

I J

Problem

Abnormal noise.

Clattering in the unit

Whistling sound

Motor will not start

DANGER ! The aerator cylinder can cause injuries !

V Prior to rectifying faults, unplug from the mains

and wait until the aerator cylinder has stopped.

V Wear working gloves when rectifying faults.

If the aerator cylinder is in wear adjustment position 3 and is worn,

the aerator cylinder must be replaced.

Only use the original GARDENA cylinder for art. 4068 which can

be ordered via GARDENA-Service.

1. Unscrew two screws

2. Lift aerator cylinder

shaft 2.

3. Remove bearing shell

4. Push new spring

the new aerator roller

5. Push new aerator cylinder

way that the torsion spring

shaft

6. Push bearing shell

7. Screw bearing shell

out tightening too much.

8. Set wear compensation to aerator position 1

(see 6. Maintenance "Adjusting for wear" ).

Possible Cause

Foreign bodies on the aerator

cylinder are hitting the Aerator.

Foreign bodies blocking

the aerator cylinder.

Cogged belt slipping.

Faulty cable.

The conductor cross-section of

the extension cable is possibly

too low.

on the underside of the housing.

at an angle 1 and pull away the drive

from the aerator cylinder

, new stop

and new torsion spring

on to the drive shaft in such a

is inserted in the gap in the drive

on to the aerator roller

to the underside of the housing

Remedy

1. Switch off the Aerator,

remove the mains plug from

the socket and wait until the

Aerator has stopped rotating.

2. Remove foreign bodies.

3. Check aerator immediately.

immediately.

v Have the machine repaired

by GARDENA Service.

v Check cable.

v Contact your electrician.

into

, with-