KitchenAid KHHC2090SBL0 설치 지침 매뉴얼 - 페이지 12

{카테고리_이름} KitchenAid KHHC2090SBL0에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. KitchenAid KHHC2090SBL0 12 페이지. Microwave hood combination
KitchenAid KHHC2090SBL0에 대해서도 마찬가지입니다: 부품 목록 (8 페이지)

페이지 인쇄

Recommended

Vent Length

A 31/4 '' x 10" (8.3 x 25.4 cm) rectangular or 6" (15.2 cm) round vent

should be used.

The total length of the vent system including straight vent,

elbow(s), transitions and wall or roof caps must not exceed the

equivalent of 140 ft (42.7 m) for either type of vent. See

"Recommended

Standard Fittings" section for equivalent lengths.

For best performance, use no more than three 90 ° elbows.

To calculate the length of the system you need, add the equivalent

lengths of each vent piece used in the system. See the following

examples:

31/4 ' ' x 10" (8.3 x 25.4 cm) vent system = 73 ft (22.2 m) total

A. One 3 _" x !0" (8.3 x 25.4 cm) 90 ° elbow = 25 ft (7. 6 m)

B. 1 wall cap = 40 ft (12.2 rn)

C. 2 ft (O.6 m) + 6 ft (1.8 m) straight = S ft (2.4 m)

6" (15.2 cm) vent system = 73 ft (22.2 m) total

2 ft

6 ft (1=8 m)

ASSISTANCE

Call your authorized dealer or service center. When you call, you

will need the microwave oven model number and serial number.

Both numbers can be found on the model and serial number

plate, which is located behind the microwave oven door on the

front frame of the microwave oven.

If you need additional assistance, call us at our toll free number

listed in the Use and Care Guide, or visit us on the Web.

If any of the installation hardware needs to be replaced, call us at

our toll free number listed in the Use and Care Guide, and

reference the appropriate

part number listed here.

Damper Assembly

Part Number 8206442

Mounting Plate

Part Number 8206319

Upper Cabinet Template

Part Number 8205274

Mounting Screw Kit (includes

parts A-G in "Parts Supplied" in

the "Tools and Parts" section)

Part Number 8206613

Vent Deflector

Part Number 8205980

A. Two 90 ° elbows = 20 ft (6.1 m)

B. 1 wall cap = 40 ft (12.2 rn)

C. 1 rectangular

to round transition piece = 5 ft (1.5 m)

D. 2 ft (O.6 m) + 6 ft (!.S m) straight = S ft (2.4 m)

If the existing vent is round, a rectangular to round transition piece

must be used. In addition, a rectangular 3" (7.6 cm) extension vent

between the damper assembly and rectangular to round transition

piece must be installed to keep the damper from sticking.

8206590

4619-656-18632

7/06

Printed in China