KitchenAid KHHC2090SBT2 설치 지침 매뉴얼 - 페이지 5
{카테고리_이름} KitchenAid KHHC2090SBT2에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. KitchenAid KHHC2090SBT2 12 페이지. Microwave hood combination
페이지 인쇄Wall Venting Installation
Only
To Remove Wall Damper Vent Cover:
1. Locate the wall damper vent cover on the back of the
microwave oven.
2. Using diagonal wire cutting pliers, gently snip out the damper
vent cover at the perforations.
A
B
C
D
3=
4.
A. Diagonal wire cutting pliers
B. Back of microwave
oven
C. Wall damper vent cover
D. Perforations
Save the cover for possible change of venting method in the
future.
Position the damper assembly so that the long tab slides into
the slot on the right side of the damper vent opening, as
shown. Then secure with mounting screw.
A
B
C
Roof Venting Installation
Only
To Remove
Roof Damper Vent Cover:
1. Locate the roof damper vent cover on the top of the
microwave oven.
2. Using diagonal wire cutting pliers, gently snip out the damper
vent cover at the perforations.
A
B
C
D
A. Diagonal wire cutting priers
B. Top of microwave oven
C. Roof damper vent cover
D. Perforations
3. Save the cover for possible change of venting method in the
future.
NOTE: Do not install damper assembly at this time.
A. Mounting screw
B. Damper assembly
C. Long tab (inside slot)