KitchenAid KHHC2090SBT2 Manual de instruções de instalação - Página 5

Procurar online ou descarregar pdf Manual de instruções de instalação para Forno micro-ondas KitchenAid KHHC2090SBT2. KitchenAid KHHC2090SBT2 12 páginas. Microwave hood combination

Imprimir página
Wall Venting Installation
Only
To Remove Wall Damper Vent Cover:
1. Locate the wall damper vent cover on the back of the
microwave oven.
2. Using diagonal wire cutting pliers, gently snip out the damper
vent cover at the perforations.
A
B
C
D
3=
4.
A. Diagonal wire cutting pliers
B. Back of microwave
oven
C. Wall damper vent cover
D. Perforations
Save the cover for possible change of venting method in the
future.
Position the damper assembly so that the long tab slides into
the slot on the right side of the damper vent opening, as
shown. Then secure with mounting screw.
A
B
C
Roof Venting Installation
Only
To Remove
Roof Damper Vent Cover:
1. Locate the roof damper vent cover on the top of the
microwave oven.
2. Using diagonal wire cutting pliers, gently snip out the damper
vent cover at the perforations.
A
B
C
D
A. Diagonal wire cutting priers
B. Top of microwave oven
C. Roof damper vent cover
D. Perforations
3. Save the cover for possible change of venting method in the
future.
NOTE: Do not install damper assembly at this time.
A. Mounting screw
B. Damper assembly
C. Long tab (inside slot)