Gardena T 1030 사용 설명서 - 페이지 9

{카테고리_이름} Gardena T 1030에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Gardena T 1030 18 페이지. Water timer electronic
Gardena T 1030에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지), 사용 설명서 (11 페이지), 종료 지침 (20 페이지), 사용 설명서 (20 페이지)

페이지 인쇄
Gardena T 1030 사용 설명서
1. Setting the watering program on the programming card
2. Insert programming card
3. Press red button briefly.
The green LED flashes for 10 seconds.
4. Remove programming card
keeping it straight (within 10 seconds).
The green LED goes on for 5 seconds and the program has
been transferred.
8
If the green LED flashes at 10 second intervals, the Watering
Timer has been programmed and the program is active.
Push the timer slide to the actual time of day
(e.g.: 12 o'clock).
Push starting time slide to the starting time required
(e.g.: 6 o'clock).
Push watering time slide to the length of time required.
(e.g.: 15 minutes).
Push cycle slide to the cycle required
(e.g.: 24 hours = every day).
8
in the card slot of the Water Timer.
8
at a constant speed whilst
8
:
9