Gardena T 1030 Panduan Petunjuk Pengoperasian - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Peralatan Rumput dan Taman Gardena T 1030. Gardena T 1030 18 halaman. Water timer electronic
Juga untuk Gardena T 1030: Panduan Petunjuk Pengoperasian (20 halaman), Panduan Petunjuk Pengoperasian (11 halaman), Petunjuk Pengoperasian (20 halaman), Panduan Petunjuk Pengoperasian (20 halaman)
Halaman Cetak
1. Setting the watering program on the programming card
2. Insert programming card
3. Press red button briefly.
The green LED flashes for 10 seconds.
4. Remove programming card
keeping it straight (within 10 seconds).
The green LED goes on for 5 seconds and the program has
been transferred.
8
If the green LED flashes at 10 second intervals, the Watering
Timer has been programmed and the program is active.
Push the timer slide to the actual time of day
(e.g.: 12 o'clock).
Push starting time slide to the starting time required
(e.g.: 6 o'clock).
Push watering time slide to the length of time required.
(e.g.: 15 minutes).
Push cycle slide to the cycle required
(e.g.: 24 hours = every day).
8
in the card slot of the Water Timer.
8
at a constant speed whilst
8
:
9