Avaya Definity 6211 빠른 참조 - 페이지 5
{카테고리_이름} Avaya Definity 6211에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Avaya Definity 6211 9 페이지. Avaya definity 6211: quick reference
페이지 인쇄
Remove the desk stand by sliding it to the left until it is
2
free of the telephone base.
Desktop
stand
Figure 3. Sliding the Base from the Bottom of the Set
Plug one end of the line cord into the line jack on the
3
bottom of the telephone.
Align the other end of the line cord so that it appears
4
through the slot at the top of the stand and reattach the
stand to the telephone by sliding the stand into the
appropriate tabs and then to the right.
After you have attached the stand to the telephone, use
5
the screw provided to tighten the stand onto the back of
the telephone set.
Figure 4. Tightening the Stand to Back of the Telephone
Turn the telephone right-side up and place it on your desk
6
or table.
Plug one end of the coiled handset cord into the handset
7
jack on the side of the telephone.
Plug the other end of the handset cord into the handset.
8
Hang up the handset.
9
Plug the free end of the line cord into a modular wall jack.
10
Lift the handset and listen for dial tone.
11
Set the Ringer Volume Control switch to the setting you
12
want.
WALL INSTALLATION
Use the following directions to mount the telephone on a
standard wallphone jack with mounting studs.
5
Slide stand
to left and lift