Avaya Definity 6211 빠른 참조 - 페이지 6

{카테고리_이름} Avaya Definity 6211에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Avaya Definity 6211 9 페이지. Avaya definity 6211: quick reference

Note: For wall installation, do NOT unbundle the line cord

packaged with the telephone; that is, leave the line cord in its

coiled position.

You must reverse the handset tab (which holds the

handset when you hang up). See Figure 4.

Hold down the switchhook and slide the handset tab up

and out of its slot.

Turn the tab so that the curved end is facing up.

Insert the tab back into its slot.

a. Handset

retainer

in place

c. Reposition

handset

retainer

down

Figure 5. Reversing the Handset Hook

Turn the telephone upside down so that you can see the

bottom of the telephone.

Remove the mounting base by sliding the base to the left

until it is free of the telephone. See Figure 4.

Turn the base so the larger end is down.

Plug one end of the line cord into the line jack on the

bottom of the telephone. (Keep the cord bundle in the

cavity on the lower housing.) Leave the other end of the

cord unattached for later use.

Note: You may prefer to use an 8-inch line cord rather

than the 14-foot cord provided with the telephone. If you

use the 14-foot cord, you will need to place it into the

back of the telephone in its original coiled position.

After you have attached the stand to the telephone, use

the screw provided to tighten the stand onto the back of

the telephone set.

Figure 6. Tightening the Stand to Back of the Telephone

b. Press to release

and then remove

handset retainer

d. Replace handset

retainer

(up

position)

(down

position)