Lexmark MS710 Series 매뉴얼 - 페이지 4

{카테고리_이름} Lexmark MS710 Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark MS710 Series 20 페이지. Printing guide
Lexmark MS710 Series에 대해서도 마찬가지입니다: 기술 노트 (3 페이지), 연결 매뉴얼 (6 페이지), 종이 매뉴얼 (4 페이지), 이동 매뉴얼 (3 페이지), 소모품 매뉴얼 (3 페이지), 메뉴 맵 (2 페이지), 정보 매뉴얼 (1 페이지), 설정 시트 (2 페이지), 빠른 매뉴얼 (20 페이지), (그리스어) (17 페이지)

페이지 인쇄
Lexmark MS710 Series 매뉴얼
Action
Step 1
a
Make sure your software program is using a correct fill pattern.
b
Resend the print job.
Do horizontal voids appear on prints?
Step 2
a
Load the specified tray or feeder with a recommended type of paper.
b
Resend the print job.
Do horizontal voids appear on prints?
Step 3
a
Redistribute the toner in the imaging unit.
1
Remove the toner cartridge, and then the imaging unit.
2
Firmly shake the imaging unit.
Warning—Potential Damage: Do not expose the imaging unit to direct
light for more than 10 minutes. Extended exposure to light may cause
print quality problems.
3
Reinstall the imaging unit, and then the cartridge.
b
Resend the print job.
Do horizontal voids appear on prints?
Step 4
Replace the imaging unit, and then resend the print job.
Do horizontal voids appear on prints?

Incorrect margins on prints

ABC
ABC
DEF
DEF
Action
Step 1
a
Move the width and length guides in the tray to the correct positions for the
paper size loaded.
b
Resend the print job.
Are the margins correct?
Print quality Guide
Page 4 of 19
Yes
No
Go to step 2.
The problem is solved.
Go to step 3.
The problem is solved.
Go to step 4.
The problem is solved.
Contact
customer
The problem is solved.
support.
Yes
No
The problem is solved.
Go to step 2.