Lexmark MS810n 매뉴얼 - 페이지 18

{카테고리_이름} Lexmark MS810n에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark MS810n 20 페이지. Ms810 series monochrome laser printer
Lexmark MS810n에 대해서도 마찬가지입니다: 연결 매뉴얼 (6 페이지), 정보 매뉴얼 (1 페이지), 이동 매뉴얼 (3 페이지), 종이 매뉴얼 (4 페이지), 메뉴 맵 (3 페이지), 설정 시트 (2 페이지), 인쇄 결함 매뉴얼 (1 페이지), 매뉴얼 (17 페이지), 인쇄 매뉴얼 (18 페이지), 모노 품질 매뉴얼 (1 페이지), 제품 사양 (2 페이지), 제품 사양 (2 페이지)

페이지 인쇄
Lexmark MS810n 매뉴얼
Action
Replace the imaging unit, and then resend the print job.
Is the print density uneven?

Vertical voids appear on prints

Leading edge
Trailing edge
Action
Step 1
a
Make sure your software program is using a correct fill pattern.
b
Resend the print job.
Do vertical voids appear on prints?
Step 2
a
From the printer control panel, set the paper type and weight in the Paper
menu to match the paper loaded in the tray.
b
Resend the print job.
Do vertical voids appear on prints?
Step 3
Check if you are using a recommended type of paper.
a
Load the specified tray or feeder with a recommended type of paper.
b
Resend the print job.
Do vertical voids appear on prints?
Step 4
a
Redistribute the toner in the imaging unit.
1
Remove the toner cartridge, and then the imaging unit.
2
Firmly shake the imaging unit.
Warning—Potential Damage: Do not expose the imaging unit to direct
light for more than 10 minutes. Extended exposure to light may cause
print quality problems.
3
Reinstall the imaging unit, and then the cartridge.
b
Resend the print job.
Do vertical voids appear on prints?
Print quality Guide
Page 18 of 19
Yes
No
Contact
customer
The problem is solved.
support.
Yes
No
Go to step 2.
The problem is solved.
Go to step 3.
The problem is solved.
Go to step 4.
The problem is solved.
Go to step 5.
The problem is solved.