Makita 6076D 사용 설명서 - 페이지 6

{카테고리_이름} Makita 6076D에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 6076D 14 페이지. Cordless driver drill
Makita 6076D에 대해서도 마찬가지입니다: 사용 설명서 (17 페이지)

페이지 인쇄
Makita 6076D 사용 설명서
Charging
Connect the charging plug to
the
charging
connector,
then
plug
in
the charger to the
power receptacle. Charging takes 3 hours.
CAUTION:
* T h e battery in your
n e w
tool
is
not fully
charged. You will need to charge it before
use.
Do
not operate the tool during charging.
Overcharging more than
2
days consider-
ably s h o r t e n s t h e battery service life.
Always unplug the charger after completing
the charge.
Charging plug
Installing or removing driver bit or drill bit
CAUTION :
Always set the reversing switch lever to the neutral position before installing or removing
the bit.
Hold the
ring and t u r n the sleeve counter-
clockwise t o open the chuck jaws. Place
the bit in the chuck as far as it will go.
Hold the ring firmly and t u r n the sleeve
clockwise t o tighten the chuck.
To remove the bit, hold the ring and t u r n
the sleeve counterclockwise.
Sleeve
Ring
6