Makita 6202DW 사용 설명서 - 페이지 9

{카테고리_이름} Makita 6202DW에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 6202DW 16 페이지. Cordless driver drill equipped with electric brake

Switch action

Tool

speed is increased

increasing pres-

sure on the trigger. To start the tool, simply

pull the trigger. Release the trigger t o stop.

S w i t c h t r i g g e r 3 . p

'\\

CAUTION :

Before inserting the battery cartridge into the tool, always check t o see that the switch

trigger actuates properly and returns t o the "OFF" position when released.

Reversing switch action

This tool has a reversing switch t o change

the direction of rotation. Slide the revers-

ing switch t o the left for clockwise rota-

tion or to the right for counterclockwise.

CAUTION :

*Always check the direction of rotation before operation.

.Move the reversing switch only after the tool comes t o a complete stop. Changing the

direction of rotation before the tool stops may damage the tool.

Speed change

To change the speed, slide the speed change

lever t o the "H" side for high speed or

"L"

side for low speed.

To slide the

speed change lever easily, pull the trigger

slightly while pushing the speed change

lever. Be sure that the speed change lever

is set

t o the correct position before opera-

tion. Use the right speed for your job.

CAUTION :

S p e e d

change lever

Always set the speed change lever fully into the correct position. If you operate the tool

with the speed change lever positioned halfways between the "H" side and "L" side, the

tool may be damaged.