Makita 6203DWAE 사용 설명서 - 페이지 10
{카테고리_이름} Makita 6203DWAE에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 6203DWAE 17 페이지. Cordless driver drill equipped with electric brake
Makita 6203DWAE에 대해서도 마찬가지입니다: 기술 정보 (5 페이지)
페이지 인쇄
OPERATION
Switch action
CAUTION:
Before inserting the battery cartridge into the tool, always check to see that the switch
trigger actuates properly and returns to the "OFF" position when released
To start the tool, simply pull the trigger.
Tool speed is increased by increasing pres-
sure on the trigger. Release the trigger to
stop.
7 7 -
Switch trigger
Reversing switch action
CAUTIO N:
*Always check the direction of rotation before operation
*Use the reversing switch only after the tool comes to a complete stop. Changing the
direction of rotation before the tool stops may damage the tool
This tool has a reversing switch to change
the direction of rotation. Depress the
reversing switch lever from the A side for
clockwise rotation or from the B side for
counterclockwise rotation. When the switch
lever is in the neutral position, the switch
trigger cannot be pulled.
Speed change
To
change the speed, first switch off the
tool and then slide the speed change lever
to the
"11"
side for high speed or
"1"
side
for low speed. Be sure that the speed
change lever is set to the correct position
before operation. Use the right speed for
your job.
Reversing switch lever
-
Clockwise
Counterclockwise
Low speed
0
High speed
a
Speed change lever
10