Makita 6203DWAE Руководство по эксплуатации - Страница 10
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Сверло Makita 6203DWAE. Makita 6203DWAE 17 страниц. Cordless driver drill equipped with electric brake
Также для Makita 6203DWAE: Техническая информация (5 страниц)
Печатать страницу
OPERATION
Switch action
CAUTION:
Before inserting the battery cartridge into the tool, always check to see that the switch
trigger actuates properly and returns to the "OFF" position when released
To start the tool, simply pull the trigger.
Tool speed is increased by increasing pres-
sure on the trigger. Release the trigger to
stop.
7 7 -
Switch trigger
Reversing switch action
CAUTIO N:
*Always check the direction of rotation before operation
*Use the reversing switch only after the tool comes to a complete stop. Changing the
direction of rotation before the tool stops may damage the tool
This tool has a reversing switch to change
the direction of rotation. Depress the
reversing switch lever from the A side for
clockwise rotation or from the B side for
counterclockwise rotation. When the switch
lever is in the neutral position, the switch
trigger cannot be pulled.
Speed change
To
change the speed, first switch off the
tool and then slide the speed change lever
to the
"11"
side for high speed or
"1"
side
for low speed. Be sure that the speed
change lever is set to the correct position
before operation. Use the right speed for
your job.
Reversing switch lever
-
Clockwise
Counterclockwise
Low speed
0
High speed
a
Speed change lever
10