Lexmark Multifunction Laser 사용

{카테고리_이름} Lexmark Multifunction Laser에 대한 사용을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark Multifunction Laser 4 페이지. Copy guide
Lexmark Multifunction Laser에 대해서도 마찬가지입니다: 매뉴얼 (4 페이지), 매뉴얼 (4 페이지), 매뉴얼 (4 페이지), 사용 (4 페이지), 사용 (4 페이지), 사용 (4 페이지), 팩스 매뉴얼 (4 페이지), 팩스 매뉴얼 (4 페이지), 팩스 매뉴얼 (4 페이지), 매뉴얼 (3 페이지)

Lexmark Multifunction Laser 사용
E-mail guide
The printer can be used to e-mail scanned documents to one or more recipients.
You can send an e-mail from the printer by typing the e-mail address, using a shortcut number, or using the address book.
Sending an e-mail using the touch screen
1
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, then adjust the paper guides.
Note: Make sure the size of the original document and the copy paper size are the same. Failure to set the proper size may
result to a cropped image.
3
From the home screen, navigate to:
E-mail > Recipient
4
Enter the e-mail address, or press
To enter additional recipients, touch Next Address, and then enter the address or shortcut number you want to add.
Note: You can also enter an e-mail address using the address book.
5
Touch Done > Send It.
Sending an e-mail using a shortcut number
1
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, then adjust the paper guides.
3
Press
#
, enter the shortcut number using the keypad, and then touch
To enter additional recipients, touch Next address, and then enter the address or shortcut number you want to add.
4
Touch Send It.

Using the address book

1
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine clippings)
into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, then adjust the paper guides.
3
From the home screen, navigate to:
E-mail >Recipient(s) >
#
and then enter the shortcut number.
> enter the name of recipient > Browse shortcuts
E-mail guide
Page 1 of 4
.