Lexmark MX310 Series 빠른 참조 매뉴얼 - 페이지 15
{카테고리_이름} Lexmark MX310 Series에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark MX310 Series 17 페이지. Monochrome laser multifunction printer
Lexmark MX310 Series에 대해서도 마찬가지입니다: 기술 노트 (3 페이지), 매뉴얼 복사 (3 페이지), 팩스 매뉴얼 (3 페이지), 소모품 매뉴얼 (2 페이지), 정보 매뉴얼 (1 페이지), 설정 시트 (2 페이지), 사양 (2 페이지), 제품 사양 (2 페이지)
4
Insert the tray.
5
From the printer control panel, touch
and continue printing. For non‑touch‑screen printer models, select
Next >
> Clear the jam, press OK >
[x]‑page jam, open tray [x]. [24y.xx]
1
Pull the tray completely out of the printer.
Note: The message on the printer display indicates the tray
where the jammed paper is located.
2
Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.
to clear the message
.
3
Insert the tray.
4
From the printer control panel, touch
and continue printing. For non‑touch‑screen printer models, select
Next >
[x]‑page jam, clear manual
feeder. [25y.xx]
1
From the multipurpose feeder, firmly grasp the jammed paper on
each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
to clear the message
> Clear the jam, press OK >
.
15
2
Flex the sheets of paper back and forth to loosen them, and then
fan them. Do not fold or crease the paper. Straighten the edges on
a level surface.
3
Reload paper into the multipurpose feeder.
Note: Make sure the paper guide lightly rests against the edge of
the paper.
4
From the printer control panel, touch
and continue printing. For non‑touch‑screen printer models, select
Next >
> Clear the jam, press OK >
to clear the message
.