Lexmark MX310 Series 빠른 참조 매뉴얼 - 페이지 4
{카테고리_이름} Lexmark MX310 Series에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark MX310 Series 17 페이지. Monochrome laser multifunction printer
Lexmark MX310 Series에 대해서도 마찬가지입니다: 기술 노트 (3 페이지), 매뉴얼 복사 (3 페이지), 팩스 매뉴얼 (3 페이지), 소모품 매뉴얼 (2 페이지), 정보 매뉴얼 (1 페이지), 설정 시트 (2 페이지), 사양 (2 페이지), 제품 사양 (2 페이지)
페이지 인쇄
7
From the printer control panel, set the paper size and paper type
in the Paper menu to match the paper loaded in the tray.
Note: Set the correct paper size and type to avoid paper jams
and print quality problems.
Loading the multipurpose feeder
Use the multipurpose feeder when printing on different paper sizes
and types or specialty media, such as card stock, transparencies, and
envelopes. You can also use it for single‑page print jobs on letterhead.
1
Open the multipurpose feeder.
a
Pull the multipurpose feeder extender.
b
Pull the extender gently so that the multipurpose feeder is fully
extended and open.
4
2
Squeeze the tab on the left width guide, and then move the guides
for the paper you are loading.
1
2
3
Prepare the paper or specialty media for loading.
•
Flex sheets of paper back and forth to loosen them, and then
fan them. Do not fold or crease the paper. Straighten the edges
on a level surface.
•
Hold transparencies by the edges. Flex the stack of
transparencies back and forth to loosen them, and then fan
them. Straighten the edges on a level surface.
Note: Avoid touching the printable side of the
transparencies. Be careful not to scratch them.