Fronius TPS 4000 설치 지침 매뉴얼 - 페이지 11

{카테고리_이름} Fronius TPS 4000에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fronius TPS 4000 20 페이지. Second earthing socket at rear
Fronius TPS 4000에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (20 페이지)

페이지 인쇄

Removing the hexagon head screw, width = 19

Removing the hexagon nut, width = 32

(9)

(e)

Mounting the current-socket blanking caps

(9)

(e)

Re-mounting the front current socket

Remove the front current socket:

Undo the hexagon head screw

(c)with the n°19 flat spanner

Remove the hexagon head screw

Remove along with the screw:

(c)

belleville spring washer

socket star

the existing current cable

Undo the hexagon nut (d) with the re-

versible ratchet (C) and the "socket for

socket wrench, width 32

Remove the hexagon nut

Remove insulating washer

Pull out the front (-) current socket to-

wards the front

(d)

Mount the current-socket blanking

caps (9):

onto the front (-) current socket

that you removed in Step 4

onto the current socket contained

in the installation kit

The recess (e) must point downwards.

Mount the front (-) current-socket,

complete with its blanking cap:

Insert the front (-) current-socket,

working from the outside towards

the inside

Insert insulating washer

Screw on the hexagonal nut

Tighten the hexagonal nut with the

torque wrench and the "socket for

socket wrench, width 32"

Thightening torque 35 Nm

IMPORTANT! The current-socket recess

(e) must point downwards.