Fronius TPS 4000 Kurulum Talimatları Kılavuzu - Sayfa 11
Kaynak Sistemi Fronius TPS 4000 için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Fronius TPS 4000 20 sayfaları. Second earthing socket at rear
Ayrıca Fronius TPS 4000 için: Kurulum Talimatları Kılavuzu (20 sayfalar)
Sayfayı Yazdır
Removing the hexagon head screw, width = 19
Removing the hexagon nut, width = 32
(9)
(e)
Mounting the current-socket blanking caps
(9)
(e)
Re-mounting the front current socket
Remove the front current socket:
4
-
Undo the hexagon head screw
(c)with the n°19 flat spanner
-
Remove the hexagon head screw
Remove along with the screw:
(c)
-
belleville spring washer
-
socket star
-
the existing current cable
-
Undo the hexagon nut (d) with the re-
versible ratchet (C) and the "socket for
socket wrench, width 32
-
Remove the hexagon nut
-
Remove insulating washer
-
Pull out the front (-) current socket to-
wards the front
(d)
Mount the current-socket blanking
5
caps (9):
a)
onto the front (-) current socket
that you removed in Step 4
b)
onto the current socket contained
in the installation kit
The recess (e) must point downwards.
Mount the front (-) current-socket,
6
complete with its blanking cap:
-
Insert the front (-) current-socket,
working from the outside towards
the inside
-
Insert insulating washer
-
Screw on the hexagonal nut
-
Tighten the hexagonal nut with the
torque wrench and the "socket for
socket wrench, width 32"
-
Thightening torque 35 Nm
IMPORTANT! The current-socket recess
(e) must point downwards.
11