Lexmark MX310dn 빠른 참조 - 페이지 12
{카테고리_이름} Lexmark MX310dn에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark MX310dn 16 페이지. Monochrome laser multifunction printer
Lexmark MX310dn에 대해서도 마찬가지입니다: 기술 노트 (3 페이지), 사양 (2 페이지), 제품 사양 (2 페이지)
페이지 인쇄
8
Insert the toner cartridge by aligning the side rails of the cartridge
with the arrows on the side rails inside the printer, and then insert
the cartridge into the printer.
9
Close the front door.
10
From the printer control panel, touch
and continue printing. For non‑touch‑screen printer models, select
Next >
> Clear the jam, press OK >
[x]‑page jam, open rear door. [20y.xx]
1
Open the front door to loosen the jammed paper in the rear door.
2
Gently pull down the rear door.
to clear the message
CAUTION—HOT SURFACE: The inside of the printer might
be hot. To reduce the risk of injury from a hot component,
.
allow the surface to cool before touching it.
12
3
Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.
4
Close the rear door, and then the front door.
5
From the printer control panel, touch
and continue printing. For non‑touch‑screen printer models, select
Next >
> Clear the jam, press OK >
[x]‑page jam, clear standard bin. [20y.xx]
1
Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.
to clear the message
.