Lexmark MX310dn 빠른 참조 - 페이지 13
{카테고리_이름} Lexmark MX310dn에 대한 빠른 참조을 온라인으로 검색하거나 PDF를 다운로드하세요. Lexmark MX310dn 16 페이지. Monochrome laser multifunction printer
Lexmark MX310dn에 대해서도 마찬가지입니다: 기술 노트 (3 페이지), 사양 (2 페이지), 제품 사양 (2 페이지)
페이지 인쇄
2
From the printer control panel, touch
and continue printing. For non‑touch‑screen printer models, select
Next >
> Clear the jam, press OK >
[x]‑page jam, remove tray 1 to clear
duplex. [23y.xx]
CAUTION—HOT SURFACE: The inside of the printer might be
hot. To reduce the risk of injury from a hot component, allow
the surface to cool before touching it.
1
Pull the tray completely out of the printer.
to clear the message
2
Locate the blue lever, and then pull it down to release the jam.
.
3
Firmly grasp the jammed paper on each side, and then gently pull
it out.
13
Note: Make sure all paper fragments are removed.
4
Insert the tray.
5
From the printer control panel, touch
and continue printing. For non‑touch‑screen printer models, select
Next >
> Clear the jam, press OK >
[x]‑page jam, open tray [x]. [24y.xx]
1
Pull the tray completely out of the printer.
Note: The message on the printer display indicates the tray
where the jammed paper is located.
to clear the message
.