Makita 6300DW 사용 설명서 - 페이지 7
{카테고리_이름} Makita 6300DW에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 6300DW 15 페이지. 13 mm (1/2") equipped with electric brake
페이지 인쇄Nominal diameter of wood
screw
B i t
No.
2.1
-
2.7 (3/32"
-
1/8")
Selecting
bit
*Phillips bit
Use the chart to determine the best
size
driver bit for the size of screw that you
No.
2
No.
3
wish to use.
3.1
-
4.8 (118"- 3/16")
5.1
-
5.8 (13164''
-
15/64")
Slotted bit
Use
a
slotted bit that properly fits the screw slot. Use of
a
bit that is too small will
damage the screw and/or bit.
Installing or removing drill bit or driver bit
CAUTION:
Always be sure that the tool is switched off and the battery cartridge i s removed before
installing or removing the bit.
To install the bit, place it in the chuck
as
far
as it
will go. Tighten the chuck by hand.
Place the chuck key in each of the three
holes and tighten clockwise. Be sure to
tighten all three chuck holes evenly.
To remove the bit, turn the chuck key
counterclockwise in just one hole, then
loosen the chuck by hand.
Chuck key
/
Chuck key
7