Makita 6300DW Руководство по эксплуатации - Страница 7
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Сверло Makita 6300DW. Makita 6300DW 15 страниц. 13 mm (1/2") equipped with electric brake
Печатать страницуNominal diameter of wood
screw
B i t
No.
2.1
-
2.7 (3/32"
-
1/8")
Selecting
bit
*Phillips bit
Use the chart to determine the best
size
driver bit for the size of screw that you
No.
2
No.
3
wish to use.
3.1
-
4.8 (118"- 3/16")
5.1
-
5.8 (13164''
-
15/64")
Slotted bit
Use
a
slotted bit that properly fits the screw slot. Use of
a
bit that is too small will
damage the screw and/or bit.
Installing or removing drill bit or driver bit
CAUTION:
Always be sure that the tool is switched off and the battery cartridge i s removed before
installing or removing the bit.
To install the bit, place it in the chuck
as
far
as it
will go. Tighten the chuck by hand.
Place the chuck key in each of the three
holes and tighten clockwise. Be sure to
tighten all three chuck holes evenly.
To remove the bit, turn the chuck key
counterclockwise in just one hole, then
loosen the chuck by hand.
Chuck key
/
Chuck key
7