Makita 6304LR 사용 설명서 - 페이지 7

{카테고리_이름} Makita 6304LR에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 6304LR 17 페이지. Makita 6304lr drill: specifications
Makita 6304LR에 대해서도 마찬가지입니다: 부품 분석 (2 페이지)

페이지 인쇄

1. Chuck key

1. Stopper holder

2. Depth gauge

3. Side grip

4. Convex

5. Concave

1. Depth gauge

2. Side grip

Installing or removing drill bit

003056

To install the bit, place it in the chuck as far as it will go.

Tighten the chuck by hand. Place the chuck key in each of

the three holes and tighten clockwise. Be sure to tighten all

three chuck holes evenly.

To remove the bit, turn the chuck key counterclockwise in just

one hole, then loosen the chuck by hand.

After using the chuck key, be sure to return to the original

position.

Depth gauge (optional accessory)

003060

The depth gauge is convenient for drilling holes of uniform

depth.

Loosen the side grip and remove it. Fit the convex on the

stopper holder to the concave on the tool barrel. Insert the

side grip into the stopper holder and screw the side grip.

Insert the depth gauge into the hole in the stopper holder.

003061

Adjust the depth gauge to the desired depth and tighten the

side grip firmly.