Ceyear 6481 Series 빠른 매뉴얼 - 페이지 4

{카테고리_이름} Ceyear 6481 Series에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ceyear 6481 Series 6 페이지. Optical fiber fusion splicer

Cleaning and Maintenance

 Cleaning of V-groove
The dirt on V-groove or fiber fixture may cause the fibers to deflect, resulting in larger fusion loss.
1.
Prepare a fiber and cut about 10mm from the bottom.
2.
Keep the fiber at a 45° angle.
3.
Clean the contaminants in V-groove by pushing it with the end of a well-cut fiber along the one
direction.
4.
If V-groove is too dirty, clean the contents in V-groove with a pointed cotton swab, and clean the
bottom of V-groove along one direction with a fine cotton swab moistened with absolute alcohol.
Note: If the left and right images are significantly misaligned after the fiber propulsion, V-groove
must be cleaned.