Ceyear 6481 Series Короткий посібник - Сторінка 4

Переглянути онлайн або завантажити pdf Короткий посібник для Електроінструмент Ceyear 6481 Series. Ceyear 6481 Series 6 сторінок. Optical fiber fusion splicer

Друкувати сторінку

Cleaning and Maintenance

 Cleaning of V-groove

The dirt on V-groove or fiber fixture may cause the fibers to deflect, resulting in larger fusion loss.

Prepare a fiber and cut about 10mm from the bottom.

Keep the fiber at a 45° angle.

Clean the contaminants in V-groove by pushing it with the end of a well-cut fiber along the one

direction.

If V-groove is too dirty, clean the contents in V-groove with a pointed cotton swab, and clean the

bottom of V-groove along one direction with a fine cotton swab moistened with absolute alcohol.

Note: If the left and right images are significantly misaligned after the fiber propulsion, V-groove

must be cleaned.