Fronius TransSteel 2200c 빠른 매뉴얼

{카테고리_이름} Fronius TransSteel 2200c에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fronius TransSteel 2200c 2 페이지.

/ Perfect Welding

/ Solar Energy / Perfect Charging

TransSteel 2200c

Quick Guide to synergic welding

SAFETY

Before working with the device, ensure that you have read and understood all the documents provided in hard copy and online.

This document does not describe all the functions of the device. For a complete description of the device, refer to the Operating Instructions.

Set the synergic welding process

When setting a welding power parameter, the

remaining parameters are set automatically

MMA welding

TIG welding

The welding power parameters can be adju-

sted individually

Set the welding power

Sheet thickness

Welding current

Wire speed

select desired parameter

set desired parameter

42,0426,0263,EN

002-04042018

Set the filler metal and shielding gas

1 .

2 .

Adjust the parameters for correction

Arc length correction

Welding voltage

Arc-force dynamic

select desired parameter

set desired parameter

Set the operating mode

2-step mode: short weld seams, tacking work

4-step mode: longer weld seams, high level of

comfort

Special 4-step mode: additional settings for star-

ting and final current

3 .

Spot welding: for overlapping sheets / stitch

welding: light-gauge sheet welding and air-gap

bridging

Optimise welding results

1. Measure the welding circuit resistance r

2. Set the mains fuse so that the device switches off

before the mains fuse trips.

The description of the aforementioned measures can be

found in the Operating Instructions of the power source

Operating Instructions: