Alien Aircraft Super Dragon AG-501 매뉴얼 - 페이지 5

{카테고리_이름} Alien Aircraft Super Dragon AG-501에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alien Aircraft Super Dragon AG-501 7 페이지. Glow conversion

8...Glue 3/32" balsa sheet to the outside of the pylon. Moisten

the outside of the sheet with an ammonia based glass cleaner

like Windex to soften the wood and allow it to bend around the

curves better. You can use C/A glue for this step.

When the glue is dry, trim the sheet flush with the front, back

and bottom of the pylon.

9...Glue the two 1/2" x 3" x 3" balsa blocks to two sides of the

3" balsa block. The grain on these parts should be going the

same direction. You can use C/A glue for this step.

10...Glue the balsa block to the back of the pylon. The bottom

should be flush with the bottom of GP-02. The grain of the

blocks should run fore and aft. You can use C/A glue for this

step.

11...Trim the top, bottom & sides of the block to match the pro-

file shown on page 2.

Page 5