Alien Aircraft Super Dragon AG-501 Handmatig - Pagina 5
Blader online of download pdf Handmatig voor {categorie_naam} Alien Aircraft Super Dragon AG-501. Alien Aircraft Super Dragon AG-501 7 pagina's. Glow conversion
Pagina afdrukken8...Glue 3/32" balsa sheet to the outside of the pylon. Moisten
the outside of the sheet with an ammonia based glass cleaner
like Windex to soften the wood and allow it to bend around the
curves better. You can use C/A glue for this step.
When the glue is dry, trim the sheet flush with the front, back
and bottom of the pylon.
9...Glue the two 1/2" x 3" x 3" balsa blocks to two sides of the
3" balsa block. The grain on these parts should be going the
same direction. You can use C/A glue for this step.
10...Glue the balsa block to the back of the pylon. The bottom
should be flush with the bottom of GP-02. The grain of the
blocks should run fore and aft. You can use C/A glue for this
step.
11...Trim the top, bottom & sides of the block to match the pro-
file shown on page 2.
Page 5