A&L Furniture Poly 33 Round Bar Table 조립 지침 - 페이지 2

{카테고리_이름} A&L Furniture Poly 33 Round Bar Table에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. A&L Furniture Poly 33 Round Bar Table 2 페이지.

PARTS

(included)

Square or

Round Top (1)

Pedestal (1)

Table Feet (4)

STEP 1

Lay table top upside down on a clean surface that won't scratch top. Insert the end of the pedestal that

does not have the predrilled holes into the square in the center of the top. Push all the way down against

the top then fasten with the 2" screws in the predrilled holes. (Pedestal does not have predrilled holes as

screws are self drilling.)

STEP 2

Insert the bolts in the ends of the table feet into the predrilled holes in the bottom of the pedestal. Put

flange nuts on the inside & tighten with the

shows.

HARDWARE

2" Screws (4)

Flange Nuts (8)

Square Drive Bit (1)

TOOLS NEEDED

" Wrench or Socket

Screwdriver or Drill

" wrench or socket. Make sure feet are turned like photo

(included)