A&L Furniture Poly 33 Round Bar Table Assembly Instructions - Page 2
Browse online or download pdf Assembly Instructions for Indoor Furnishing A&L Furniture Poly 33 Round Bar Table. A&L Furniture Poly 33 Round Bar Table 2 pages.
Print Page
PARTS
(included)
Square or
Round Top (1)
Pedestal (1)
Table Feet (4)
STEP 1
Lay table top upside down on a clean surface that won't scratch top. Insert the end of the pedestal that
does not have the predrilled holes into the square in the center of the top. Push all the way down against
the top then fasten with the 2" screws in the predrilled holes. (Pedestal does not have predrilled holes as
screws are self drilling.)
STEP 2
Insert the bolts in the ends of the table feet into the predrilled holes in the bottom of the pedestal. Put
flange nuts on the inside & tighten with the
shows.
HARDWARE
2" Screws (4)
Flange Nuts (8)
Square Drive Bit (1)
TOOLS NEEDED
7
/
" Wrench or Socket
16
Screwdriver or Drill
7
/
" wrench or socket. Make sure feet are turned like photo
16
(included)
a
b
c
a
a