A&L Furniture Lighthouse with Base 조립 지침 - 페이지 3

{카테고리_이름} A&L Furniture Lighthouse with Base에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. A&L Furniture Lighthouse with Base 3 페이지.

STEP 3

Set the lighthouse body upright & place the head on top, aligning the predrilled holes inside the head with

the threaded inserts in the top of the body. (See photo 6.) Insert the 1½" bolts in the predrilled holes inside

the head. (See photo 7.) Using the phillips head screwdriver turn the bolts into the threaded inserts &

tighten.

STEP 4

Place the cap on top of the head. (See photo 8.) Take the lighthouse to the desired location & pound in the

2 ground stakes in the predrilled holes in the base ring. (See photo 9.) If your lighthouse included the

optional solar light kit, refer to the operating instructions enclosed with it.

photo 6

photo 8

photo 10

photo 7

photo 9