AlienTek DP100 사용자 설명서 - 페이지 17

{카테고리_이름} AlienTek DP100에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AlienTek DP100 18 페이지. Digital power

6，FAQ

The summary of common problems is shown in Table 6.1:

Problems and phenomena

OCP/OVP/OPP/OTP Promote

REP/UVP Promote

Connection failure of PC

Enter CC mode when output

No actual voltage output

The device cannot be turned on

Display current greater than

1mA after closing the output

Display current greater than

1mA without load

User Manual

DP100 Digital Power User Manual

Check if the output parameters are higher than the set protection

parameters, and set the protection parameters reasonably

REP: Check if the output terminal is reversed, UVP: Check if

TypeC has correct power input

Check if the USBA-A cable is used correctly and if the USB mode

is USBD

Check if the ISET is set too small and increase the ISET value

appropriately

1. Check if VSET is set to 0

2. Contact after-sales service

1. Check if the TypeC power supply is normal

2. Check if the device has been turned off, and short press the left

button to turn it on

3. Contact after-sales service

Contact after-sales service

Table 6.1 Summary of issues

High Performance Digital Power

Solution