AlienTek DP100 User Manual - Page 17

Browse online or download pdf User Manual for Portable Generator AlienTek DP100. AlienTek DP100 18 pages. Digital power

Print Page
6，FAQ
The summary of common problems is shown in Table 6.1:
Problems and phenomena
OCP/OVP/OPP/OTP Promote
REP/UVP Promote
Connection failure of PC
Enter CC mode when output
No actual voltage output
The device cannot be turned on
Display current greater than
1mA after closing the output
Display current greater than
1mA without load
User Manual
DP100 Digital Power User Manual
Check if the output parameters are higher than the set protection
parameters, and set the protection parameters reasonably
REP: Check if the output terminal is reversed, UVP: Check if
TypeC has correct power input
Check if the USBA-A cable is used correctly and if the USB mode
is USBD
Check if the ISET is set too small and increase the ISET value
appropriately
1. Check if VSET is set to 0
2. Contact after-sales service
1. Check if the TypeC power supply is normal
2. Check if the device has been turned off, and short press the left
button to turn it on
3. Contact after-sales service
Contact after-sales service
Contact after-sales service
Table 6.1 Summary of issues
15
High Performance Digital Power
Solution
www.alientek.com