A&S 2.1 Bar with Wireless Subwoofer 300 사용자 설명서 - 페이지 11

{카테고리_이름} A&S 2.1 Bar with Wireless Subwoofer 300에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. A&S 2.1 Bar with Wireless Subwoofer 300 16 페이지.

B. Use a 3.5mm to 3.5mm audio cable (included) to connect the TV's or external audio device

headphone socket to the AUX socket on the unit.

Connect to Power

Before connecting the AC power

cord, ensure you have completed

all other connections.

Risk of product damage! Ensure

that the power supply voltage

corresponds to the voltage

printed on the back or the

underside of the unit.

•

Connect the mains cable to the

AC~ Socket of the unit and then

into a mains socket

•

Connect the mains cable to the

AC~ Socket of the subwoofer

and then into a mains socket.

Automatic Pairing

Plug the soundbar and the subwoofer into the mains sockets and then press on the unit or remote

control to switch the unit to ON mode. The subwoofer and soundbar will automatically pair within

30 seconds.

•

When the subwoofer is pairing with the soundbar, the Pair indicator on the subwoofer will flash.

•

When the subwoofer is paired with the soundbar, the Pair indicator on the subwoofer will light

up steadily.

NOTE: Do not press Pair on the rear of the subwoofer, except for manual pairing.

Manual Pairing

It is very abnormal that the connection would fail, you should not attempt manual pairing in normal

usage. If the automatic pairing fails, the Pair indicator on the subwoofer will keep flashing. Ensure

that all the cables are well connected, the main unit is switched to ON mode and the Pair indicator

on the subwoofer lights up steadily. If it still doesn't work, pair the subwoofer with the soundbar

manually.

AUX