Align-Pilates Combo Chair II 조립 지침 및 사용자 설명서 - 페이지 6

{카테고리_이름} Align-Pilates Combo Chair II에 대한 조립 지침 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Align-Pilates Combo Chair II 12 페이지.

7) Now insert 4 x Long bolts with loctite, nuts & washers (50) (2 bolts for each side panel) to

secure side panels in place. Do not fully tighten at this stage.

2 x Long bolts with loctite, nuts

and washers (50) per side panel

Connecting Bar

Fastener

Fig.7

8) Whilst the Foot Pedals are still upside down,

as in Fig. 7, thread the 1 x Chrome Pedal Pivot

Pole (10) through the first of the foot pedals,

before threading all the way through pause at

the middle to slide the 1 x Nylon washer (25)

onto the pivot pole, now continue to thread

the pole through the second foot pedal. The

nylon washer should sit between the two foot

pedals as in Fig. 8. Before moving onto step

10, connect the foot pedals together with the

connecting bar fastener (Fig.7).

Fig.6

Fig.8